T2 Surge Protector for Wind Turbine

Name: T2 Surge Protector for Wind Turbine
SKU: 336
Rating: 5 (1335 reviews)

PRODUCT DETAILS

Features

REP-SP24 can work in the various voltage of 5-60Vdc.
Suitable for signal series application.
DIN rail easy mounting.
Pluggable, and the work signal would not be interrupted when the module is pulled out.
Low insertion impedance without affecting signal transmission.
LED light failure indication, and with remote signal contact optional.

Datasheet

Model	REP-SP24/2
The SPD according to IEC/EN 61643-1/-11	Type 2 (C2)
The SPD port	Two ports
Nominal AC voltage (Un)	24V
Maximum continuous voltage (Uc)	27V
Nominal discharge current(8/20μs) ln	5kA
Maximum discharge current(8/20μs) lmax	10kA
Voltage protection level Up	60V
Rated load current IL	0.5A
Maximum transmission rate	2Mbps
Insertion loss	＜0.1dB
Degree of protection	IP20
Protection methods	Balance/Imbalance (optional)
Grounding methods	Direct grounding/Indirect grounding (optional)
Failure Mechanism	The communication line is short-circuited or disconnected to the ground