T2 Surge Protector for Wind Turbine

PRODUCT DETAILS

Features

  • Type2 surge protector comply with IEC61643-11.
  • Reliable supervision due to double integrated disconnection devices.
  • Low voltage protection level.
  • Optional to use without a fuse.

  • Pluggable design, 3+0 protection mode.

  • Remote alarm terminal optional.

Datasheet

Model
REP-MP20T2-385-5S
The SPD according to IEC/EN 61643-11

Type2

Energy coordination with termini equipment (≤5m)
T2
Response time
25ns
Nominal AC voltage(Un)
690Vac
Maximum continuous voltage(Uc)
385Vac
Nominal discharge current(8/20μs) ln(L-PE, N-PE)
20kA
Maximum discharge current(8/20μs) lmax(L-PE, N-PE)
40kA
Voltage protection level Up @@20kA(8/20μs)
≤5kV
Voltage protection level(Up)@In
≤1.8kV
Backup fuse
315AgL/gG
Temporary overvoltage(TOV)UT
440V/5sec.
Temporary overvoltage(TOV)(UT)-Characteristic
Withstand
Remote alarm contact 
NO/NC/C, Isolated Form C
Remote alarm contact capability Un/In
AC:250/0.5A        DC:250V/0.1A;  75V/0.5A
Remote alarm contact connecting wire
Max. 1.5mm²  or #16AWG
Remote communication contact type
Float switch contact
Ac switching capacity
250V/0.1A
The minimum cross-sectional area of installation
2.5mm² solid/flexible
The maximum cross-sectional area of installation
16mm² flexible 
Operating temperature range  
-40℃~+80℃
Work/Fault indicator
Green: Normal ; Red: Failure
Enclosure material
Red thermoplastic material ,UL 94v-0
Installation 35mm DIN rail, according to EN 60715
The installation location
Indoor
Degree of protection
IP20
Size
3 modules
Certification
TUV




 

SEND INQUIRY
GENERAL LOOK

(MP20T2-385-5S)54mm

     


Related Product
HomeEmailContact