T2 Surge Protector for Wind Turbine

Name: T2 Surge Protector for Wind Turbine
SKU: 316
Rating: 5 (1315 reviews)

PRODUCT DETAILS

Features

Datasheet

Model	REP-MP20T2-275-3S
The SPD according to IEC/EN 61643-11	T2
Response time(t.)	25ns
Maximum continuous voltage(Uc)	275Vac
Impulse discharge current Iimp (10/350μs) (N-PE)	12.5kA
Nominal discharge current(8/20μs) ln(L-PE, N-PE)	20kA
Maximum discharge current(8/20μs) lmax(L-PE, N-PE)	40kA
Voltage protection level Up @ln	1.2kV
Temporary overvoltage(TOV)(L-N)(UT)-Characteristic	385V/5sec.
Remote alarm contact	NO/NC/C, isolated from C
Remote alarm contact capability Un/In	AC:250/0.5A DC:250V/0.1A; 75V/0.5A
Remote alarm contact connecting wire	Max. 1.5mm² or #16AWG
The minimum cross-sectional area of installation	1.5mm² solid/flexible
The maximum cross-sectional area of installation	25mm² flexible
Operating temperature range	-40℃~+80℃
Work/Fault indicator	Green: Normal ; Red: Failure
Installation	35mm DIN rail, according to EN 60715
Shell material	35mmDINrail,according to EN 60715
The installation location	Red thermoplastic material ,UL 94v-0
Degree of protection	IP20
Size	4 modules
Certification	TUV