T1+T2 Surge Protector for Wind Turbine

Name: T1+T2 Surge Protector for Wind Turbine
SKU: 363
Rating: 5 (1362 reviews)

PRODUCT DETAILS

Features

The combination TypeI +Type II surge protector can be installed at zero distance from the subsequent II surge protector without decoupling inductance.
Non exhausting encapsulated spark gap technology.
The smallest size in the industry, Iimp=25kA, Uc=760Vac, saving half of the space.
High follow current extinction and limitation due to no follow current.
Reliable supervision due to new LTR energy control technology.
With remote signaling contact optional and failure indicator.

Datasheet

Model	REP-MS25-T1+T2-760-5S
The SPD according to IEC/EN 61643-11	I+II/T1+T2
Energy coordination with termini equipment (≤5m)	T1+T2+T3
Response time(t.)	≤100ns
Nominal AC voltage(Un)	690Vac
Maximum continuous voltage(Uc)	760Vac
Impulse discharge current Iimp (10/350μs) (N-PE)	25kA
Nominal discharge current(8/20μs) ln(L-PE, N-PE)	25kA
Total discharge current(10/350μs)[L1+L2+L3-PEN] Itotal	75kA
Voltage protection level(Up)@10kA(8/20μs)	≤2.5kV
Voltage protection level(Up)@25kA(8/20μs)	≤3.5kV
Backup fuse	315AgL/gG
Temporary overvoltage(TOV) ) [L-PEN] Ut	440V / 120min.
Follow current extinguishing capability a.c.(L-N/N-PE) Ifi	25kA rms
Remote alarm contact	Remote alarm contact optional
Remote alarm contact capability Un/In	AC:250/0.5A DC:250V/0.1A; 75V/0.5A
Remote alarm contact connecting wire	Max. 1.5mm² or #16AWG
Remote communication contact type	Float switch contact
Ac switching capacity	250V/0.1A
The minimum cross-sectional area of installation	1.5mm² solid/flexible
The maximum cross-sectional area of installation	25mm² flexible
Operating temperature range	-40℃~+80℃
Work/Fault indicator	Green: Normal ; Red: Failure
Installation	35mm DIN rail, according to EN 60715
Shell material	35mmDINrail,according to EN 60715
The installation location	Red thermoplastic material ,UL 94v-0
Degree of protection	IP20
Size	6 modules