Surge Protector for AC Power Supply System (T1+T2)

Name: Surge Protector for AC Power Supply System (T1+T2)
SKU: 314
Rating: 5 (1313 reviews)

PRODUCT DETAILS

Features

Datasheet

Model	REP-BC25T1+T2-320-3S/4S
The SPD according to IEC/EN 61643-11	I+II/T1+T2
Energy coordination with termini equipment (≤5m)	T1+T2+T3
Response time	≤100ns
Maximum continuous voltage(Uc)	320Vac
Lightning impulse current(10/350μs) limp (L-PE, N-PE)	25kA/100kA
Nominal discharge current(8/20μs) ln(L-PE, N-PE)	25kA/100kA
Maximum discharge current(8/20μs) lmax(L-PE, N-PE)	200kA
Specific energy(L-PE)/(N-PE)(W/R)	156.25kJ/ohms
Voltage protection level Up @ln	≤1.5kV
Follow current extinguishing capability a.c. Ifi (L-N/N-PE)	25kA rms/100A rms
Follow current limitation/Selectivity	No tripping of a 32 A gG fuse up to 25kArms(prosp)
Temporary overvoltage(TOV)(L-N)(UT)-Characteristic	440V/120min.-withstand
Temporary overvoltage(TOV)(L-N)(UT)-Characteristic	1200V/120ms.-withstand
Additional abnormal voltage test:485Vac/50Hz for 24h	Withstand
Let-Through-Energy in combination with an MOV S20K275(Iimp=2.5...25kA)	＜0.5J
Remote alarm contact	NC/C,
Remote alarm contact capability Un/In	AC:250/0.5A DC:250V/0.1A; 75V/0.5A
Remote alarm contact connecting wire	Max. 1.5mm² or #16AWG
Operating temperature range	-40℃...+80℃
Fault indicator	Light-off: Normal ; Light-on: Failure
Cross-sectional area(min)	1.5mm²solid/flexible
Cross-sectional area(max)	35mm²flexible
For mounting on	35mm DIN rail
Enclosure material	Red thermoplastic, UL 94 V-0
Degree of protection	IP20
Size	8 modules