Surge Protectors for Signal System

PRODUCT DETAILS

Features

  • REP-SP can work in the various voltage of 5-60Vdc.
  • Pluggable surge protection for DIN rail easy mounting.
  • Signal transmission is not interrupted when exchanging module.
  • Two-stage protection circuit; suitable to use RS232 or RS485 surge protection.
  • Low insertion impedance without affecting signal transmission.
  • LED light failure indication, and with remote control contact.

Datasheet

Model REP-SP24/2
SPD interface
Two interfaces
The SPD according to IEC/EN 61643
T2
Nominal d.c. voltage (Un)
24V
Max. continuous operating d.c. voltage (Uc)
27V
Load current insertion (IL)
0.5A
Nominal discharge current (8/20 μs)  (In)
5kA
Max discharge current (8/20 μs) (Imax)
10kA
Voltage protection level (Up)
60V
Maximum transmission rate
2Mbps
Insertion loss
<0.1dB
Degree of protection
IP20
Test standards
IEC61000-4-5; IEC61643:21
Online Replacement
Yes

SEND INQUIRY
GENERAL LOOK

REP-SP24/2

Basic circuit diagram

Dimension drawing(mm)



Related Product
HomeEmailContact