BC25 Type1+Type2 Power Surge Protector

Name: BC25 Type1+Type2 Power Surge Protector
SKU: 305
Rating: 5 (1304 reviews)

PRODUCT DETAILS

Features

Combination T1+T2 SPD surge protector for single phase.
Non exhausting encapsulated spark gap technology with extremely high surge capacity.
High follow current extinction and limitation due to no follow current.
Reliable supervision due to new LTR energy control technology.
With remote signaling contact optional and failure indicator.

Datasheet

Model	REP-BC25T1+T2-320-1S/2S
The SPD according to IEC/EN 61643-11	I+II/T1+T2
Energy coordination with termini equipment (≤5m)	T1+T2+T3
Response time	≤100ns
Maximum continuous voltage(Uc)	320Vac
Lightning impulse current(10/350)limp[L-N,N-PE]	15kA/60kA
Nominal discharge current(8/20)In[L-N,N-PE]	15kA/60kA
Maximum discharge current(8/20)Imax[L-N,N-PE]	100/120kA
Voltage protection level Up @In	≤1.5kV
Follow current extinguishing capability a.c. Ifi(L-N/N-PE)	25kA rms/100A rms
Follow current limitation/Selectivity	No tripping of a 32 A gG fuse up to 25kArms(prosp)
Temporary overvoltage(TOV)(L-N)(UT)-Characteristic	440V/120min.-withstand
Temporary overvoltage(TOV)(N-PE)(UT)-Characteristic	1200V/200ms-withstand
Additional abnormal voltage test:485Vac/50Hz for 24h	Withstand
Let-Through-Energy in combination with an MOV S20K275(Iimp=2.5...25kA)	＜0.5J
Remote alarm contact	NC/C
Remote alarm contact capability Un/In	AC:250/0.5A DC:250V/0.1A; 75V/0.5A
Remote alarm contact connecting wire	Max. 1.5mm² or #16AWG
Operating temperature range	-40℃+80℃
Fault indicator	Light-off: Normal ; Light-on: Failure
Cross-sectional area (min)	1.5mm²solid/flexible
Cross-sectional area (max)	35mm²flexible
For mounting on	35mm DIN rail
Enclosure material	Red thermoplastic, UL 94 V-0
Degree of protection	IP20
Size	4 modules