Surge Protectors for Signal System

Name: Surge Protectors for Signal System
SKU: 332
Rating: 5 (1331 reviews)

PRODUCT DETAILS

Features

For data and signal protection, can be used for tracker, controller etc., signal and data transmission surge protection.
Suitable to use for RS232 or RS485 protection.
Small size, minimum installation work.
One pair line protection both for line- line and line-PG.

Datasheet

Model	REP-SD12	REP-SD32	REP-SD48	REP-SD110
Nominal voltage Un	12V	32V	48V	110V
Max. continuous d.c voltage Uc	14V	33V	55V	170V
Max. continuous a.c. voltage Uc	9.5V	23V	38.5V	120V
Nominal current II	1.5A	1.5A	1.5A	1.5A
Nominal discharge current(8/20 μs) per line In	5KA	5KA	5KA	5KA
Maximum discharge current(8/20 μs) per line Lax	10KA	10KA	10KA	10KA
Voltage protection level line-line @ln Up	≤55V	≤110V	≤175V	≤500V
Voltage protection level line-PG @ln Up	≤40V	≤65V	≤100V	≤270V
Voltage protection level line-line @ 1 KV/μs Up	≤36V	≤90V	≤160V	≤460V
Voltaqe protection level line-PG @ 1 KV/μs Up	≤19V	≤45V	≤80V	≤230V
Series impedance per line	1.8ohms	1.8ohms	1.8ohms	1.8ohms
Bandwidth line-PG	2.5MHz	6MHz	10MHz	16MHz
Capacitance line-line	≤1.2nF	≤0.5nF	≤0.3nF	≤0.2nF
Capacitance line-PG	≤2.4nF	≤1nF	≤0.6nF	≤0.4nF
Operating temperature range	40°C...+80°C
Degree of protection	IP 20
Mounting on	35 mm DIN rail
Connection input/output	spring / spring
Connection wire	0.08 — 2.5mm2
Earthing bv	Polyamide PA 6.6
Color	Green
Packing unit	1 pc(s)